Start PXE over ipv4 is an issue that more often than not happens when the computer tries to start on Local Area Network (LAN). This code emerges right away after the PC reboots or switches on. After showing this problem, the computer keeps on loading with a loop of dots and takes around two to three minutes to boot. This issue note actually occurs when the PC boot isn’t configured correctly in the Basic Input/Out System (BIOS). When the system is not capable of detecting the bootable drive, it attempts to load from the LAN, and at that time, the problem comes up. Keep on reading to know the best ways to fix this error.
Try The Following Methods For Troubleshooting This Particular Error :
We have worked really hard to find different solutions for solving this particular error and have come across the following methods. If you are also facing the same issue, then you can solve it on your own. You would not need any professional help to solve this error. Simply follow these methods mentioned below for fixing the issue in no time. Just make sure not to skip any steps mentioned:
Method#1: Disabling The Wake On LAN In BIOS For Fixing The Start PXE Over IPv4
Disabling the wake on Local Area Network (LAN) option has done wonders for users who were not successful with any other solutions and the solution is quite simple to pull off if you’re comfortable adequate to boot into Basic Input/Output System (BIOS) yourself.
- Switch the PC off by navigating to the Start Menu > click on Power Button < choose Shut down.
- Switch the computer on over again and enter the Basic Input/Output System (BIOS) by simply hitting the BIOS key while your system boots. The Basic Input/Output System key is typically shown on your boot screen, saying something like ‘Press ___ for entering the Setup.’ The common Basic Input/Output System keys are Del, F1, F2, F10, and Esc. Note that you’ll need to be rapid about it as the message will disappear pretty quickly.
- Now, the Wake on Local Area Network (LAN) option which you’ll have to change can be found under different tabs on Basic Input/Output System firmware tools created by the diverse manufacturers, and there’s no unique method to locate that. It can usually be found under the Power options or anything titled like that, such as the advanced settings.
- When you find the option Wake-On-LAN in any part of the Basic Input/Output System settings screen, go to that and simply change its value to be disabled.
- Then, go to the Exit part and select Exit Saving Changes option. It’ll continue with the boot so check if the start PXE over ipv4 still emerges.
Method#2: Updating The Basic Input/Output System (BIOS)
If there’s something wrong with the Basic Input/Output System of the PC, it is difficult to utter that anything will be capable of fixing the issue except for a complete update of the Basic Input/Output System. Updating the Basic Input/Output System can be an advanced procedure, and the problem is that it varies greatly from one manufacturer to the other. That’s why you have to follow the steps cautiously if you desire to see some good results.
- First of all, learn the current version of Basic Input/Output System you have already installed on the PC by simply entering “msinfo’ (without quotation marks) in the Start menu’s search bar.
- Then, find the Basic Input/Output System version just under the Processor model and write it on a piece of paper or copy and paste that to the text file to avoid any mistake.
- Find out whether the PC was pre-built, bundled, or assembled manually by buying all the parts individually. It is significant because you do not desire to utilize the Basic Input/Output System (BIOS) made for one part of the computer when it won’t apply to the other devices and you’ll overwrite the Basic Input/Output System with a wrong one, directing to some major issues and system errors.
- Prepare the OC for this update now. If you’re updating the laptop, make certain that the battery is completely charged and plug it in case of emergency. If you’re updating your PC, it is sensible to utilize the UPS (Uninterruptible Power Supply) for making sure that the PC does not switch off throughout the updating process because of the power outage. Then, simply start the updating process.